Below is a list of the Vectorize tools using the Erase Raster feature. When applicable, a description of behavior exceptions for the Erase Raster feature and/or the Undo/Redo feature can be found.

• Place Element - No specific behaviors apply to the Erase Raster feature or the Undo/Redo feature.

• Continue Element - Since the continued element is considered a new element, the raster is erased under all this continued element.

• Insert Element - Since the inserted element is considered a new element then the raster is erased under all this inserted element.

• Convert Lines - When Erase Raster and Auto Continue are ON, the Erase Raster rules applied are the ones from the Continue Element tool.

• Convert All Connected Lines - When Erase Raster is on the raster for the converted elements, is erased after the conversion process has ended either by the user (<ESC>) or by normal completion of the tool.

• Convert Contour Lines - When Erase Raster and Auto Continue are ON, the Erase Raster rules are the ones for the Continue Element tool.

• Convert Circle - The erased raster is always the one under the original first circle found, regardless if the Lock toggle or the round off values are used.